BR67

Hydraulic Breaker
• Available with Anti-Vibration Handles
• Underwater Model Available
• Uses: Utility Construction; Repair of Water and Gas Mains; Heavy-Duty Driving

Call for pricing

DR19

Digger
• High Blow Frequency
• "D" Handle and Fore End Grip are Shock and Heat Insulated

Call for pricing

HD45

Hammer Drill
• Drills Holes: 3/4"– 30"
• Adjustable Bit Rotation Forward and Reverse
• Underwater models Available

Call for pricing

Hydraulic Hand Saw Cart
• Easy conversion for hand sawing
• Front pointer
• Weight 160lbs with 24" saw
• Rear wheels and handles adjust for flush cutting
$2,600.00 Cart only

Fits 21" or 24" handsaw

* Add $150 to Handsaw Price to adapt to cost

Call for Pricing

Hydraulic Angle Saw
Marzoochi Hydraulic Motor 21"
21" Inch Blade Capacity
Price includes Hose Whips and Quick Disconnects

21" Angle Saw $2,100
24" Angle Saw $2,550

Call for Pricing

Conventional or Flush Cut Saw
Available in 16, 21 or 24"
Marazoocchi motors with 8, 10, 12, or 15 GPM flow
Pictured as a combo saw can run either flush cut or conventional
Stainless steel collars

21" Conventional Saw $1,975.00
24" Conventional Saw $2,000.00
21" Flush Cut Saw $2,100
24" Flush Cut Saw $2,300

Call for Pricing

Horizontal Flush Cut Saw
• 24" Blade capacity 10” cutting depth
• Flush cutting with rear tilt adjuster
• Water and hydraulic water valve shut-off
• Weight approx. 150 lbs.
• Includes: 24” Diamond Blade
$3,180.00

Hydraulic Available 10, 12 or 15 GPM @ 2000 psi

Call for Pricing

WP-67HD Large Frame Hydraulic Power Pack

• 67hp Diesel Engine with electric start
• Adjustable gallons per minute from 4 to 30, depending on model
• Industry’s first low hydraulic oil level engine shut-off
• Dual hydraulic oil cooling systems (water/oil and oil/air heat exchangers)
• Units are self-contained and easy to move
• Selectable hydraulic flow rate will produce up to 2500psi (pressure relief valve is set at 2650psi)
• Units have 6.2 gal. Diesel fuel tank
• Lifting eye and handles allow for ease of portability
• Power packs are powder-coated for longer ware & durability
• Dual Hydraulic circuits- 1/2” Quick FF Disconnects for Small tools, 3/4 & 1” quick
disconnects for large capacity tools, both systems have fully adjustable flow rates.
• Large access panels, for easy accessibility

Call for Pricing

WP-40 DIESEL-POWERED SMALL FRAME POWER PACK

• 24 to 40 HP depending on model.
• Adjustable gallons per minute from 2 to 18 depending onmodel.
• Industry first, low hydraulic level engine shut-off.
• High efficiency air-cooled hydraulic system includes a 10micron full flow return filter.
• Self-contained units are compact and easy to move at a weight of under 300 lbs.
• Selectable hydraulic flow rate will produce up to 2500psi.
• The pressure relief valve is set at 2650 psi.
• Units have a 6.5 gallon gas tank and an electric start.
• Large, 13” x 4” never-flat tires are standard.
• Lifting eye and handles allow for ease of portability.
• Power packs come with a powder-coated finish for longer wear.

Call for Pricing

WP-25D DIESEL-POWERED SMALL FRAME POWER PACKS

• 25hp Kubota diesel engine.
• Adjustable gallons per minute from 2 to 13,depending on model
• Industry’s first low hydraulic oil level engine shut-off
• High efficiency air-cooled hydraulic system includes a 10 micron full flow return filter.
• Self-contained units are compact and easy to move.
• Selectable hydraulic flow rate will produce up to 2300 psi.
• Lifting eye and handles allow for ease of portability
• Power packs are powder-coated for longer

Call for Pricing

WP-25E ELECTRIC SMALL FRAME POWER PACK

• 15 to 25 HP depending on model.
• Adjustable gallons per minute from 4 to 16, depending on model
• Industry’s first low hydraulic oil level engine shut-off
• High efficiency air-cooled hydraulic system includes a 10 micron full flow return filter.
• Self-contained units are compact and easy to move.
• Selectable hydraulic flow rate will produce up to 2300 psi.
• Lifting eye and handles allow for ease of portability
• Power packs are powder-coated for longer wear.

Call for Pricing

Previous