The 2460SM-RED is the 2′ x 5′ Surface Mount Red ADA Tile provided by ADA Solutions. ADA Solutions are made in the USA and come in a variety of colors, sizes, and applications. Their ADA Tiles the preferred manufacture of all tactile warning surfaces and dectable truncated domes for any State and Federal DOT jobs.
The surface applied tiles, like the 2460SM-RED, are used to retrofit over an exisiting concrete substrate and takes as little as 10 minutes to install. They are secured with adhesives to stick to the concrete and set with drill bits to ensure a solid placement of the tile.
Make sure the surface (for 2460SM-RED, 24″ x 60″) is clear of debris, grease, and free of all moisture.
Apply adhesive to the bottom of the frame. Adhesive applies roughly 10 Square Feet per 10 Ounces of Adhesive.
Fasten the tile using a hammer drill and a minimum of 1/4″ x 2″ SDS Bit. Must be a minimum of 2″ deep.
Caulk around the edges – make sure location is clear of deris.
These tiles are not recommended or warrantied for asphalt installation. If you have any questions, looking to order large quantities, or need additional information, please feel free to give us a call at 800-604-0088.